Equipment Direct

Soil management

Disc harrows of the following brands:

• John Deere 637: working width is 9.7 meters, the distance between the disks 22.8 cm, angle of attack of disk arrays is fixed.
• Krause: working width is 8.5 to 9.5 meters, the distance between the disks 20 cm, angle of attack of disk arrays is fixed.
• Sunflower 19H-36: working width is 11.6 meters, the distance between the disks 22 cm, angle of attack of disk arrays is fixed.
• Kewanee 1020: working width is 6.4 meters, the distance between the disks 20 cm, angle of attack of disk arrays is fixed.

Cultivators:

• John Deere 980: working width is 11.3 meters, behind the showels are teeth harrows.
• DMI Tigermate: working width are from 10.8 m to 13.7 m, behind the showels are teeth harrows.
• Case IH 4300: working width is 10m, behind the showels are teeth harrows.
• International 4700: working width is 14m.

Soil rippers of the following brands:

• 1) Case IH 9300: 9 shanks, working width is 7m, in front on the X-shaped frame are disc assembles, behind them are rolling harrows.
• 2) John Deere 510: 5 shanks, working width is 4m, on the V-shaped frame are disc assembles, and shanks placed in the between.
• 3) DMI-rippers. This brand is presented by 3 models:
  • DMI Tiger (linear): 5 shanks, working width is 4m.
  • 530-DMI Tiger: 5 shanks, working width is 4m, in front is X-shaped assembly of disks.
  • DMI 730: 7 shanks, working width is 5.2 meters, in front is X-shaped assembly of disks.
• 4) Great Plains Verti Till is presented by 2 models:
  • Verti Till 9225: working width is 5.5 meters, on the front are disk assemblies, on the back are rolling harrow.
  • Verti Till 7225: working width is 4m. on the front are disk assemblies, on the back are rolling harrow.

Diskovators of the following brands:

• 1) Case IH 4200 combo: working width is 10.7 meters, on the front are placed disk assemblies, then there are several rows of showels and on the back are pin and disk harrows.
• 2) Glencoe: working width is 11.6 meters, on the front are placed disk assemblies, then there are several rows of showels and on the back are pin harrows.
• 3) Landol 875 Soil Finisher: working width is 7.6 m, on the front are placed disk assemblies, then there are several rows of showels and on the back are pin harrows.